詳情請瀏覽銳亞的官網：www.reignmac.com

銳亞木工機械M40系列(**加工寬度400mm)

專業解決：超大型木屋梁柱、木方的重切削加工。

Φ50主軸，水平刀軸均配備外支撐軸承，切削動力強勁，合金鋼工作臺板，φ180mm直徑送料輪——M40重型四面刨系列。

銳亞木工機械M40系列重型四面木工刨床優異特性：
1.  特大加工范圍，**加工寬度400 mm，高度250mm，廣泛滿足對大型工件的加工需要。
2.  各主軸直徑為ф50mm，每個水平刀軸配置外置軸承，承載能力大，**刀具切削外徑可達ф230mm，有利于提高      加工質量。
3.  強有力的送料系統，由多組直徑為180mm的上送料輪，和多組下托輥輪所組成的送料系統，全部有動力驅動，保        證提供強勁的送料能力，并且第一組下托輥輪與送料臺同步升降，調整更簡單。
4.  送料臺嵌裝耐磨合金條，有效地提高了進料臺的耐磨性。
5.  工作臺板采用特殊合金鋼，并進行硬化處理，硬度高達HRC60度以上，耐磨性好。
6.  左右立軸采用雙層工作臺面設計，軸向調節量達80mm，可裝2組刀具，提高加工靈活性。
7.  上水平軸加工厚度的調節及左立軸加工寬度的調節采用電動設定機構，精度高，操作方便。
8.  所有送料輪，側壓輪和上水平刀軸前后壓板均采用氣動壓緊方式，壓力可調，操控方便。
9.  各刀軸移動調節廣泛采用氣動鎖緊方式，并與電動機構連鎖，安全可靠，簡化操作。
10.第二下刀軸可裝直徑達ф300mm的鋸片，并設有單獨的電動升降氣動壓緊的上壓板裝置，擴大了加工范圍。
11.主軸配置大功率電機，采用同步帶驅動，可實現強力切削。
12.變頻送料，送料速度達5-25米/分。
13.電動油泵可定時、定量（可調）潤滑工作臺面，手動油泵集中潤滑設備的位移部件。
14.采用PLC系統，實現對各電機及位置設定機構的控制。
15.可移式觸摸屏，操控方便。
16.配備國際品牌電器元件，穩定性好。
17.設有氣動吹風機，清潔更輕松。
18.全封閉式防護罩，有效地避免木屑飛濺和隔離噪音，并起到安全保護的作用。

http://www.reignmac.com

Heavy duty Four-Side moulder series M40 ( Max width400mm)

Professional solution for Heavy-duty process as ultra-large type of wooden house beam and wooden batten.
φ50mm spindle, out-ball bearings for all horizontal spindles, strong and cutting powerful, working table made in alloy steel, feeding roller with ODφ180mm-M40 heavy duty moulder series.

M40 Outstanding character
1.  Special processing range, widely satisfy the needs of greatness workpieces. The Max. working width is 400mm,and the Max. thickness is 250mm.
2.  Each spindle with the diameter of 50mm. The out bearing on the horizontal spindles can increase the carrying capacity. The Max. outer diameter of cutting circle reaches 230mm, this is good to improve the machining quality.
3.  The feeding system is built up with 6 groups of bottom rollers and 12 groups of top feeding rollers which OD is 180mm, They are driven by pneumatic to ensure powerful feeding. Besides, the 1st bottom roller and infeed table can move up and down at the same time to simplify to adjustment.
4.  The feeding table is embedded with wearable alloy for the durability.
5.  The working table adopts special alloy steel and also treated by vulcanize treatment. The hardness more than HRC60 degrees for the durability.
6.  The left and right spindles are designed to adopt double-desk working table. The axial adjustment range is 80mm. As it can hold two groups of cutter blocks, it is flexible for machining.
7.  The working thickness of top spindle and the working width of left spindle are adopt electric setting. Higher precision and easier to operate.
8.  Each feeding roller, side pressure wheels, front and rear pressure board of top spindle are pressed by pneumatic. The pressure can be adjusted and it is convenient to control.
9.  Motion adjustment is widely adopted pneumatic-locking each spindle and the inter-lock with the electric system is for safety and simplify operations.
10. For the 2nd bottom spindle, there is individual motor automatically to lift the top pressure shoe, and the saw blade installed reaches the diameter of 300mm .The top pressure shoe which is controlled by pneumatic enlarged the working range as well.
11. To assure powerful cutting, the spindles are with high-power motor and driven by synchronous belt.
12. Inverter feed speed of 5-25m/min.
13.Electric oil pump lubricates the working table in timing and ration (which can be adjusted), centralized lubrication to moving parts by manual oil pump.
14. Adopting PLC system to achieve the control of each spindle motor and location setting device.
15. Moveable PLC screen, convenient for using.
16. Adopting electric components from international class with steady quality.
17. Pneumatic blower to ease the cleanness.
18. Sealed safety cover is for the protection against noise and dust, and it is helpful for safe operation.