詳情請瀏覽銳亞的官網：www.reignmac.com
銳亞木工機械 D60M系列 雙端銑/雙端齊邊開榫機

專業解決：中度切削量的板式家具、水泥刨花板、靜電地板的兩端成型批量加工。

銳亞木工機械 D60M 系列雙端銑優異特性：
1. 所有刀軸都可調角度，更方便實現斜截、倒棱、開槽等加工工藝。
2. 可安裝粉碎刀，有利于板料、邊料的排出。
3. 采用高精密直線導軌機構定寬，運動精度高，耐磨性好，確保了機構調節時的位移精度，保證了木料加工寬度的精度要求。
4. 導軌潤滑油泵，能有效減少大拖板的運動摩擦，提高導軌壽命。
5. 采用滾動式送料履帶，履帶裝備了滾動軸承支持運動，運動平穩，定位精確，穩固可靠，噪音低。
6. 送料鏈帶的加長設計，有利于大規格板料的送進。
7. 進料靠尺可調節高度，更能滿足不同厚度板材的基準定位要求。
8. 所有鏈節采用高牌號鑄鐵材料，經過熱處理后，在CNC機床加工而成，確保各鏈節的精度。
9. 剛性立柱及拖板設計，確保滿足重型切削的需要。
10. 主軸配備高速精密軸承，銑刀轉速高達7500米/分。
11. 文本控制器調寬，復位精度達±0.3mm。
12. 各刀軸配有讀數顯示器，準確顯示刀軸調整的位置尺寸。
13. 采用變頻調速，送料速度5-25米/分。
14. 選用國際品牌電器元件，提高了機床工作的穩定性。
15. 通過PLC自動控制壓緊帶和調節鎖緊，使工件加工更穩固、準確。
16. 壓緊帶采用優質材料，耐磨性能好。
17. 壓緊帶與送料鏈帶的兩檔差速設計，無論工件靠前靠山或后靠山，都可以實現靠貼基準而送進。
18. 全密封式安全防護罩，安全防護門開閉采用氣動控制，有效地避免木屑飛濺和隔離噪音，并起到安全保護的作用。
19. 配有出料輔助導輪。
20. 導軌防護罩，有效地保護了調節絲桿免受木屑的污染。

http://www.reignmac.com
Double End Tenoner series D60M 
Professional solution for volume producing two ends profile of panel furniture with medium cutting output, MBF and PVC floor.
 
D60M Outstanding character
1. Each spindle can rotate , convenient to achieve angle-truncate , tenon, groove and etc.
2. Can hoggers on cut-off saw that can discharge waste material more helpfully.
3. Adopted widen by high precision linear orbit, machine can run in precision and wearable. It assure the precision when widen the working size, also can guarantee to fit your highly requirement for setting the working width.
4. Orbit lubrication can reduce the frictions of slide when moving, increase the nature life of orbit as well.
5. Supported with the roller bearing in the feeding belt, make the movement more stable and reduce the noise.
6. Much better to feed the big size panels with the lengthen chain belt design.
7. Adjustable height on in-feed fence is better satisfied with basis positioning requirements for different thickness of wood panel.
8. In order to assure every chain board with high precision, we use the high hardness cast iron and treated with high temperature and machining by CNC.
9. The design of rigid column and carriage to ensure the needs of heavy-duty cutting.
10. Text display for width setting .The reset accuracy can reach to ±0.3mm.
11. Each spindle is equipped with high precision bearing, spindle speed of milling units reach to 7500r/min.
12. Each spindle is configured with read out , can display the position of spindle veracious
13. Inverter to feed, feed 5-25m/min.
14. Adopted the high class electric component to build up the perfect electric system can increase the stabilization.
15. Through PLC to the control pressure belt and adjustment automatically, make the workpieces more stable and veracious.
16. Adopted excellent material to make of the pressure belts, keep good wearable.
17. Top pressure and bottom conveyor belt has the design of two different speeds, no matter before or behind the fence dot, can be achieved to feed against the benchmark.
18. Sealed safety enclosure is controlled by the pneumatic, can reduce noise levels, improve extraction and operator safety.
19. To equip with out-feed guide roller.