展鴻圖牌高性能模壓機 TM2580多功能異形壓機(Curved surface with positive pressure) 功能簡介 可進行各種高檔PVC、熱轉印及單面木皮的表面貼飾。 此機加工的各種PVC工件粘接牢固，不反彈翹邊。溝槽線條清晰到位。 可對各種較厚木皮進行完美貼飾。 General Introduction It is used to work various high-profile PVC, hot transfer and single veneer. The products are of high-quality, and will not peel off. The line and groove is clear. It can also work with various thick veneers. 設備特性 液壓系統關鍵部件采用進口配件，安全可靠技術優良。 真空泵采用德國進口真空泵。馬力強勁，故障率低。 操作系統采用PLC控制，大屏幕人機界面，控制方便，技術先進、自動化程序高。 數顯電源、電壓顯示，清晰直觀。采用微電腦溫度控制儀器，精確控制溫度。 Features Key components in the hydraulic pressure system are imported, which is safe and reliable. Vacuum pump is imported from Germany; its horsepower is strong and seldom breaks down. Operation system uses PLC from foreign. The interface is broad. It is easy to learn and convenient to operate, for it is highly automatic. Digitalized currency and voltage display are simple and clear. It uses computerized temperature controller so that the temperature is perfectly managed. 技術參數(Technical Specifications) 外形尺寸（Exterior size）：9930mm*2230mm*2150mm 工作臺尺（Working plate size）:2550mm*1270mm(內徑inner size) **加工高度(Maximum height of the work piece)：50mm 額定工作壓力(Raying working pressure)：正壓(Positive pressure)≤0.5 負壓(Negative pressure)≥-0.095Mpa 總功率(General power)：46.5kW 實際耗電(Actual power consumption)：約(about)15kW 整機重量(Weight)：10T